Handling with the function is analogous to Checking of limit strain. The values offered for display are naturally different.

Values

Check value |
The result of the check. The value of 1 means that the capacity is fully utilised. |

sigma cc,max |
Allowable stress of concrete prior and after anchoring/transfer of prestressing. |

sigma cc,ch |
Allowable stress of concrete in compression under SLS characteristic combination. |

sigma cc,qp |
Allowable stress of concrete in compression under SLS quasi-permanent combination. |

f ct,eff |
Allowable stress of concrete in tension under SLS combinations. |

sigma c,aa |
Stress of concrete after anchoring/transfer of prestressing. |

sigma cq,min |
Minimum concrete stress after application of self-weight, all permanent, and variable loads. |

sigma clt,min |
Minimum concrete stress caused by long-term loads. |

sigma cq,max |
Maximum concrete stress after application of self-weight, all permanent, and variable loads. |

sigma clt,max |
Maximum concrete stress caused by long-term loads. |

sigma c,inc |
Stress increment in concrete caused by selected load case. |

For the procedure read Performing the check of allowable stress in concrete.